Advertisement
m
Auto
Programming (see page 2
fXof
the Quick Use Guide) adds
,all the channels it can find (on
.your Antenna or Cable TV system)
into the TV's memory. Add/Delete
Channels makes it easy for you to
add other channels, or drop
unwanted channels, from the list of
channels in the TV's memory.
_
Press the MENU (M) button
on the remote, then press the
MENU • or • buttons to select
the word CHANNEL with the
TV's on-screen arrow.
_
Press the CHANNEL •
•
or
buttons (or Channel Number but-
tons on the remote) to select the
channel you want to SAVE (or
DELETE.)
_
Press the
button to SAVE
(+)
the selected channel number into
memory.
Press the (-) button to DELETE
a channel from memory.
_
Press the STATUS button to
l clear the screen after adding all the
channels you want.
12
NOTE: You can also add the VCR/AUX
mode into
the TV's channel memory. Then you can quickly
select the Audio/Video Input jacks on the rear of the
TV by pressing the Channel AV buttons.
To "SAVE" the VCR/AUX
mode into the TV's
channel memory:
• With the on-screen
menu displayed,
press the CH
• or • button and select the INPUT control.
• Press the (+) or (-) button to place the TV in the
VCR/AUX
mode.
• Press the CH • or • button to reselect the
• CHANNEL
control.
Press the (+) button to "SAVE" VCR/AUX mode
into the TV's channel scan memory.
• Press the STATUS button to clear the Menu from
the screen.
Try it out. Press the ••
buttons to be sure the
VCR/AUX
mode is present. (Should appear
between the highest and lowest broadcast channels
within your TV's scan memory.)
1
Try it out. Press the
CHANNEL••
buttons.
The channels you SAVED should
appear. Tl_e channels you
DELETED should not appear.
Remember, you can also add the
VCR/AUX mode (see page 14)
into the TV's channel memory.
Then by pressing the CH • •
buttons you can quickly select the
Audio/Video Input jacks on the
rear of the TV.
Advertisement
