Advertisement
u
yv
u can view the playback of
CR tapes (Video Disc
Players, camcorders, etc). by
using the AUDIO and VIDEO
INPUT jacks (on the rear of the
TV).
For example: to view the play-
back of a VCR tape:
(-,_[_
Conneet the VIDEO and
AUDIO IN(put) jacks on the
TV to the AUDIO and VIDEO
OUT(put) jacks on the VCR.
¢,,_,,_ Press the MENU (M) button
on the remote, then press the
MENU • or V buttons to select
the word INPUT with the TV's
on-screen arrow.
Note: You can press the CHAN-
NEL AV buttons to select
"VCR/AUX" (if it has been
added to the TV's channel mem-
ory.) See page 6 for details.
_
Press the (+) button to select
v
I he VCR/AUX(iliary)
INPUTS
on the rear of the TV.
(_
Turn the VCR ON and
PLAY the VCR tape to be
viewed on the TV.
Remember, when you're
m through using the A/V
INPUT jacks, return the INPUT
display screen on the TV to
ANTENNA. If you leave the TV
in the VCR/AUX INPUT mode
and there is no signal source con-
nected to the jacks, you will be
seeing only a blank screen on the
TV.
NOTE: If you have a mono (sin-
gle audio OUTPUT) VCR, "Y"
Connectors are available (from
your dealer or Parts Information
Center 1 800 292-6066) to con-
nect to the audio inputs on the TV.
PICTURE AND SOUND FROM
PLAYBACK OF VCR TAPE
VIDEO IN
(YELLOW)
--
RCA PHONO
PLUG CABLES
NOT SUPPLIED)
VCR
(EQUIPPED WITH VIDEO AND
AUDIO OUTPUT
JACKS)
NOTE: THE "TV/VCR" BUTI'ON
CAN ALSO BE USED TO PLACE
THE TV IN THE VCR/AUX MODE
(AS WELLAS
SELECT CHAN-
NELS 3 OR 4.)
14
Advertisement
