Advertisement
A
list" or series of previously
viewed
channels
can
be
selected
with the SURF
button on your remote
control.
With this feature
you can
easily switch
between
different
TV
programs
that currently
interest you.
The Surf control allows you to set up
to 8 channels
in its quick viewing
"list".
_.1__
Press the MENU (M) button on
I the remote, then press the MENU •
Ior • buttons to select the word
SURF with the TV s on-screen arrow.
_,_
Press the (+) button to select
l either ALl'. CHN. (Alternate
Channel)
or SURF. See explanation
of Surf options with the illustration
on this page.
_."_
Press STATUS button to clear the
screen.
_
With the SURF control ON (see
above), select a c_esired channel for
viewing. You can use the number
buttons on the remote (or the
Channel Jk or • buttons).
_
Press the SURF button
the
on
I remote while the channel display is
still present on the TV's screen.
<_'_
Press the SURF button on the
remote to quickly review current
action on channels contained within
the Surf list.
Repeat steps above to add up to eight
channels in the SURF channel mem-
ory ring.
@
__
•
L
ALl'. CHN.
(Alternate Channel) -
Current and one previ-
ons chaimel.
SURF - Current and
up to seven
additional
channels available.
Note: the Channel
Surf can be used with
fewer than eight chan-
nels. In this way the
number of Surf chan-
nels can match or fit
you present viewing
interests.
To Use
m
Alternate Channel:
With the ALT.CHN.
control ON, select
the two desired
channels for view-
ing with the number
buttons on the
remote control.
Press the SURF
button on the
remote to "toggle"
between the two
selected channels.
When using SURF:
Remember, you can
add as many as
eight channels in
the Smart Surf
Memory.
22
@oQo
22
SURF
Note: There are two methods to delete channels from the 8-
channel SURF control ring:
• To remove all channeh from the SURF memory (with
-the exception of channel 3 which will be left within the
SURF list.) - Select the CABLE control in the On-screen
menu and press the (+), (-) buttons. Adjust the control
"YES/NO/YES" if you have Cable TV; or"N_O"
if
tou are in the broadcast Antenna mode.
• To remove all channels from the SURF memory (with
the exception of the last viewed and currently selected
channels.).
From the SURF on-screen control option press
the (+) or (-) button to select the ALT.CHN. control in the
on-screen menu. Press the (+) or (-) button again to mselect
the SURF opdou.
10
Advertisement
