Advertisement
_!onvergence
is the correct lin-
ing up of the red and blue
light paths on the TV screen.
NOTE: If no color fringing (see
Smart Help) shows, then no
Convergence adjustments are nec-
essary for your TV.
t-w_mm
C2
_:_
Select CONVERGENCE
con-
trol.
With PICTURE MENU (2 of 2) on
screen, move the RED highlight
with the MENU 4_ buttons. Then
press the MENU (_d) button.
<_If
there is RED or BLUE color
fringing on the White cross, press
the MENU button to continue.
<_
Press the MENU t_
buttons
to move the red or blue cross
directly over the white cross on the
TV screen.
The red or blue cross is properly
adjusted when it is completely
merged with the white cross. (No
color appears around the edge of
the white cross).
@>Press
the STATUS button to
I clear the screen when convergence
adjustments are complete.
Remember. Convergence
set at the factory for
best viewing, but if one or more of
the (red or blue) colors appear
around the edges of objects (color
fringing) follow the steps given in
this section.
PICTURE MENU
20F2_
+
If there is REDor BLUE
fringeon the WHITEcross,
usethis adjust_nenl; to
improve the picture.
Press "M"to Continue
- or -
Press "!_"to Return
NOTE: Adjustments for "Multi- Point" on-
screen color fringing can also be made as part
of the "lV's Convergence
control system.
Follow the TV's on-screen menu directions to
select individual screen areas that can be read-
justed and set for varying red/bltm color fring-
ing conditions. These multi-point settings can
then be "Saved" to memory for the specific
are_.s of the "rv screen (or Factory Settings for
convergence can be me.ailed and put back into
place for use).
H
I
I
3
.
MULTI-POINT
CONVERGENCE
_ _pke_
toaO_
++++
_.._.
/+ +
+
/+++2 +++ ++
+ + r+_ + +
Proem"S'TAllJ_ W Cont_tm
+++++
-_: tO
_1
Fnat_/_Dr,
ffs
Advertisement
