Advertisement
<
Zhe
TV's Audio/Video lnput
acks are for direct picture and
sound connections between the TV
and a VCR (or Video Disc Player,
etc.) that has Audio/Video Output
jacks.
To view the playback of a VCR
rape by using the Audio/Video
Input jacks on the TV:
Connect the VIDEO OUT jack
from the VCR to the AUX 1
VIDEO IN jack on the TV.
,_
Connect the AUDIO OUT
jacks R(ight) and L(eft) from the
VCR to the AUX 1 AUDIO IN
jacks on the TV.
€_
Select the "AUX 1 VIDEO"
PICTURE SOURCE SELECT
control on the TV.
With the FEATURES MENU on
screen, move the RED highlight
with the MENU (M) 4_1, buttons.
Then press the MENU button.
@>Press
the MENU &V and
MENU (M) buttons to highlight
and select (tJ) the AUX 1 VIDEO
mode.
_Turn
the VCR ON and press
PLAY to view the tape on the TV.
O
I
PICTURE AND SOUND FROM
PLAYBACK
OF VCR TAPE
--FEATUP,
E MENU
NOTE: Connections
and use of the
"]
TV's rear AUX 2 VIDEO Input jacks
l
are the same as for the AUX 1 jacks
(except "AUX 2" is seleet_l as the
BACK OF TV
VIDEO IN
(YELLOW)
I
AUDIO LN
(RED/WHITE)
AUDIO/VIDEO
OUTPUT
JACKS
ON VCR
VCR
I
If you have a slngle (monaural)
Audio Output VCP.. "Y" connectors
are avdilable to complete your con-
nection. Contact yottr dealer, or our
a_cssori_$.
Pm_ Informatio_
Center ( 1-800-
851-8885) to orderany optional
Remember, after it is
! connected an easy way to
select the AUX 1 VIDEO mode is
to press the TV/VCR button on
the remote. AUX 2 VIDEO; AUX
1 Y PB PR; and the last channel
viewed can also be selected in this
way.
Also, if you have added AUX 1
VIDEO to the TV's channel mem-
ory (see page 13), you can just
press the CHANNEL AV buttons
to select the AUX 1 mode.
28
Advertisement
