Advertisement
can come through
either the
ANT/CABLE
or A UX VIDEO
Inputs
(on the rear of the 73/). PIP Picture
Source simply
tells the TV which
one of these sources
it is to show in
the PIP window.
<_
Select PIP SOURCE
control.
With FEATURES MENU (4 of 5)
[ on screen, move the RED highlight
with the MENU _
buttons. Then
press the MENU (M) button.
<_
Press the MENU AY and
MENU (M) buttons to highlight
and select the desired (I,,,")AUX
VIDEO or ANTENNA item.
ANTENNA- for a picture signal
coming from the ANTENNA plug
on the rear of the TV.
AUX 1 VIDEO- for a picture sig-
nal coming from the AUX 1 Video
Input jack on the rear of the "IV.
AUX 2 VIDEO- for a picture sig-
nal coming from the AUX 2 Video
Input jack on the rear of the TV.
_
Press the STATUS button to
clear the screen.
O
Remember. The PIP
!screen will be blank unless a
signal is connected to the selected
source (either ANT/CABLE
or
AUX VIDEO Inputs) on the rear
of the TV.
Note: The Component Video
Inputs (AUX 1 Y PB PR) can not
be selected as a source for PIP.
FEATURE MENU
4rl
Advertisement
