FEAr URES
ELECTRONIC
TIME-OF-DAY
CLOCK
AND TIMER
If your range is equipped with a digital
clock and timer, it will either be design
1 or design 2. Follow the instructions
for the illustration that matches the
clock on your range.
DESIGN
1
When range is first connected to power
or if power is interrupted,
12:00 will
flash in the display.
TO SET CLOCK: Slide switch up to
CLOCK position.
HOUR
CLOCK
12:00)
MIN
TIMER
Press and hold HOUR button until cor-
rect hour appears in the display.
Press and hold MIN button until the
correct minutes appear in the display.
TO SET MINUTE TIMER: Slide switch
down to TIMER position. The timer will
automatically
begin
counting
down
from 1 hour in increments of one min-
ute.
HOUR
MIN
CL.O_
0:59.1
TIMER
TO SET A TIMING OPERATION FOR
LESS THAN ONE HOUR: Press and
hold MIN button until desired time ap-
pears in the display. Timer will immedi-
ately begin counting down as soon as
the MIN button is released.
TO SET A TIMING OPERATION FOR
ONE TO TWO HOURS:
Press the
HOUR button. (1:59 will appear in the
display.)
Select desired
minutes
by
pressing and holding MIN button. Tim-
ing will begin when button is released.
Two hours is the maximum timing that
can be set.
DESIGN 2
©
CLOCK SET
©
MINUTE
TIMER
88:88 will flash in the display when
range is first connected to power or if
power is interrupted.
TO SET
CLOCK:
Press and hold
CLOCK SET button while turning MIN-
UTE TIMER knob to the correct time-
of-day. MINUTE TIMER knob can be
turned in either direction.
TO SET MINUTE TIMER: Turn MIN-
UTE TIMER knob tothe right, tothe de-
sired time, up to 60:00 (1 hour). Timer
will begin counting down after a few
seconds delay. When time has lapsed,
a continual beep wilt sound for up to 2
minutes.
Press CLOCK SET button to stop beep
sounds. The correct time-of-day
will
reappear in the display.
(0:59) will be displayed as soon as the
switch is moved to the TIMER posi-
tion.)
To check time-of-day
during a timing
operation, press and hold CLOCK SET
button. Time will reappear in the dis-
play.
-4-
Need help?
Do you have a question about the 3510KRA and is the answer not in the manual?
Questions and answers