Table of Contents
Advertisement
SET UP FOR USE
CHANNEL MEMORY PROGRAMMING
Use this feature to program the TV/VCR tuner to scan and memorize all the channels you receive in
your area. Use the remote control for this procedure.
You can use this feature to memodze cable channels only if your cable system connects directly from
its wall outlet to the Antenna terminal of your TV/VCR, You cannot use this feature when the TVNCR
is connected to a cable or satellite box.
1
Plug in the TVNCR power cord
Plug the TV/VCR power cord into a
standard AC outlet.
2
Turn on the TV/VCR
Press the POWER button to turn on
the TV/VCR.
3
Select"ENGLISH"
or =ESPANOL"
Select "ENGLISH" or
"ESPAl_lOL"=Spanish using
the F.FWD,_. or REW/.<I
button. "[ ]" indicates the
selected language.
I
- SETup -
1
U_NGUAGE
AUTO PRESET
4
Begin auto preset
Press the PLAY/A or
STOP/V button to point to
"AUTO PRESET".
Then press the RFWD,I_
button. The tuner scans and
•
memorizes all active channels in your area.
NOTE:
- SETUP -
LANGUAGE
[ENGLIS_
ESPAN_-
I=,AUIO PRESET
• The TVNCR distinguishes between standard
"IV channels and cable channels.
• If you want to play or record a video tape BE-
FORE presetting the tuner, you must press
the MENU button. To preset the tuner again,
see "CHANNEL SET UP AGAIN =on page 14.
5 After scanning
The tuner stops on the lowest memorized channel.
If you want to recall the selected channels, you
can select the desired channel directly with the
remote control number buttons or CHANNEL •
orY.
The channels you no longer receive or seldom
watch can be deleted from the memory. (Of
course, you can add the deleted channel into the
memory again.)
ll,i
1
Select "CHANNEL SET UP"
Press the MENU button.
Press the PLAY/=, or
STOP/Y button to point to
"CHANNEL SET UP".
Then, press the F.FWD/I_
button.
2
Select "ADD/DELETE CH"
Press the PLAY/=, or
STOP/T button to point to
=ADD/DELETE CH =.
Press the F.FWD/I_ button.
I
_MENU_
!
TIMER PROGRAMMING
pIC*nJRE
C43_ Tp_(.
SETTING
CLOCK
p, CP, AN_EL
SET Up
U_R'S SET UP
ZEI_ R_r_RN
TIME SEARCH
-
CHANNEL
SET
UP -
1
m,-ADD / DELETE
CH (T,/)
AUTO PRESET
3 Enterthe desiredchannelnumber
Press the PLAY/=, or
STOP/V button until your
I
1
desired channel number ap-
08
pears. (You can also use the
number buttons or the
_O_ELE_
CHANNEL•/•
button to
enter it.)
4
Delete (or add) it from (or Into) memory
Press the F.FWD/P- or REW/<I button. The chan-
nel number changes to Ught red. The channel is
deleted from memory.
Ifyou press the F.F'WD/_ or REW/<I button again,
the channel number changes to light blue. The
channel is added to memory again.
To delete another channel, repeat steps 3 and 4.
5 Exit the channel setup mode
Pressthe MENU button to return to TV mode.
NOTE: Press the CHANNEL • or • button to
confirm that channel(s) have been deleted or
added.
- 13 -
EN
8J14
Advertisement
Table of Contents
