Table of Contents
Advertisement
nsta iation
s uenc÷
for the windscreen
mount
!,
,Select the most suitable
position on the
Clean the surface of the windscreen
to
remove any dust and grease,,
Place the windscreen
mount on the
Plug the small end of the car charger
the power supply connector
at: the side of
the unit.
o
o
%
Push back the lever to the left until you
hear a dick
fixing the windscreen
mount
in position°
7_
8_
Plug the other end into your vehicle s
12V-24V (cigare_e
iighter)socket.
To adjust the angle of the mount, slacken
the adjustable
knobs at the suction_up
and then turn it gently, In addition to tilting
the mount up and down and from side to
side you can also rotate the mount, from
the left, -45 ° to 45°r
9.
When you finish_ tighten up the knobs
Align the docking connector
at the wind _
screen mount then push the unit down
untiI you hear a click
0
0
Note
Standard operation
temperature
of the suction
mount: is between o10°C and 60°C
The sueo
tion mount may disengage
under a tempera°
ture outside of what is specified
Note
• This unit and its car charger are designed for
use in vehicles that have 5.0 +/o 0.2V_ negao
tive ground electdca_ systems.
(This is a standard for most vehicles )
If },our vehicle has a different ty_
d ele_rical
system, the DC power system cannot b_ used.
o The unit is automatically
charged
when
connecting
the USB port of the unit and your
vehicle:s
12Vo24V (cigarette
lighteO socket
with the car charger.
Advertisement
Table of Contents
