Table of Contents
Advertisement
Features That Can Be Set Using the d (Menu) Button (Shooting Mode)
Option
Built-in ND filter
Distortion control
Active D-Lighting
Zoom memory
Startup zoom
position
M exposure
preview
Focus-coupled
metering
Commander mode
72
Select On or Off (default setting) for the built-in ND filter.
Set this feature to On in conditions such as too bright
overexposure results from the subject, so that the amount
of light that enters the camera is reduced.
Select whether to correct the peripheral distortion that
occurs due to the intrinsic characteristics of lenses.
Enabling distortion control reduces the size of the frame, as
compared to when distortion control is not enabled. The
default setting is Off.
Prevent loss of contrast details in highlights and shadows
when shooting images. The default setting is Off.
When the zoom control is operated while pressing the
w1 button, the camera changes in steps to the focal
length (equivalent to 35mm [135] format of angle of view)
of the zoom lens that is set in advance.
• The default setting is on w for all the check boxes.
When the camera is turned on, the zoom position moves
to the focal length (equivalent to 35mm [135] format of
angle of view) of the zoom lens that is set in advance. The
default setting is 28 mm.
When On is selected, the exposure setting resulting from
the shutter speed and aperture value set in D (manual)
mode is reflected in the brightness on the shooting screen.
The default setting is Off.
When On (default setting) is selected and if Metering
(A71) is set to Matrix or Spot and AF area mode
(A71) is set to Manual, the brightness of the subject is
measured by giving higher priority to the focus area.
Set how the optional flash unit fires when the flash mode
(A57) is set to z (commander mode). The default
setting for Flash mode is Standard flash and that for
Flash control mode is TTL.
Description
A
E52
E53
E53
E54
E54
E55
E55
E56
Advertisement
Table of Contents
