Nokia 6680 User Manual page 97

Hide thumbs Also See for 6680:
Table of Contents

Advertisement

Options when editing access point settings are
Change,
Advanced
To be able to use a data connection, the network service
provider must support this feature, and if necessary,
activate it for your SIM card.
Access point name
point name is needed to establish a connection to the
packet data and UMTS networks. You obtain the access
point name from your network operator or service provider.
Tip! See also
page 52,
"E-mail"
on page 65.
User
name—The user name may be needed to make a data
connection, and is usually provided by the service provider.
The user name is often case-sensitive.
Prompt
password—If you must enter a new password
every time you log in to a server, or if you do not want to
save your password in the phone, choose Yes.
Password—A password may be needed to make a data
connection, and is usually provided by the service provider.
The password is often case-sensitive.
Authentication—Select
96
settings, Help, and Exit.
(for packet data only)—The access
"Receive MMS and e-mail settings"
on page 60, and
"Access the Web"
Normal
or Secure.
Copyright © 2005 Nokia. All rights reserved.
Homepage—Depending on what you are setting up, write
the Web address or the address of the multimedia
messaging centre.
Select
Options
>
Advanced settings
following settings:
Network
type—Select the Internet protocol type to use:
IPv4 settings
or
IPv6
Phone IP
address—Enter the IP address of your phone.
Name
servers—In
Primary name
on
of the primary DNS server. In
the IP address of the secondary DNS server. Contact your
Internet service provider to obtain these addresses.
Glossary: The domain name service (DNS) is an
Internet service that translates domain names such
as www.nokia-asia.com into IP addresses like
192.100.124.195.
Proxy serv.
address—Define the address for the proxy
server.
Proxy port
number—Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
to change the
settings.
server:, enter the IP address
Second. name
server:, enter

Advertisement

Table of Contents
loading

Table of Contents