Send data using a Bluetooth
There can be only one active Bluetooth connection at a
Open an application where the item you wish to send is
stored. For example, to send an image to another
compatible device, open Gallery.
Select the item, for example, an image, and select
Tip! When searching for devices, some devices
may show only the unique addresses (device
addresses). To find the unique address of your
phone, enter the code *#2820# in the standby
The phone starts to search for devices within range.
Devices with Bluetooth technology that are within
range start to appear on the display one by one. You
can see a device icon, the name of the device, the
device type, or a short name.
Tip! If you have searched for devices earlier, a list
of the devices that were found previously is
shown first. To start a new search, select
devices. If you switch off the phone, the list is
Copyright © 2005 Nokia. All rights reserved.
To interrupt the search, press Stop. The device list
freezes, and you can start to form a connection to one
of the devices already found.
Select the device with which you want to connect.
If the other device requires pairing before data can be
transmitted, a tone sounds and you are asked to enter
Create your own passcode (1—16 digits), and agree
with the owner of the other device to use the same
code. The passcode is used only once.
Tip! To send text using a Bluetooth connection
(instead of text messages), go to Notes, write the
text, and select
After pairing, the device is saved to the paired
Glossary: Pairing means authentication. The users of the
devices with Bluetooth technology should agree what the
passcode is and use the same passcode for both devices in
order to pair them. Devices that do not have a user
interface have a factory-set passcode.
When the connection has been established, the note
using a Bluetooth connection.
does not store messages sent