Log; Recent Calls; Call Duration - Nokia 6680 User Manual

Send DTMF—To send DTMF tone strings, for example, a
password. Enter the DTMF string or search for it in
Contacts. To enter a wait character (w) or a pause
character (p), press
the tone.
Tip! You can add DTMF tones to the
or DTMF fields in a contact card.
Options during a video call
Select Options during a video call for the following
options: Hold or Disable
handset, Activate
compatible headset with Bluetooth connectivity is
attached), End active
camera, Zoom in/Zoom

Log

Recent calls

To monitor the phone numbers of missed, received, and
dialled calls, press
calls. The phone registers missed and received calls only if
the network supports these functions, the phone is
switched on, and within the network's service area.
26
repeatedly. Select
Phone number
(video, audio, or both),
loudsp., or Activate handsfree
call, Use front camera/Use back
out, and Help.
, and select Connect. > Log
Copyright © 2005 Nokia. All rights reserved.
Tip! When you see a note in the standby mode about
missed calls, select
calls. To call back, scroll to a name or number, and
OK to send press
Erasing recent call lists—To clear all recent call lists,
select Options
main view. To clear one of the call registers, open the
register you want to erase, and select
To clear an individual event, open a register, scroll to the
event, and press
Activate
(if a

Call duration

To monitor the approximate duration of your incoming and
outgoing calls, press
duration.
To set the display of the call duration while a call is active,
select Connect.
duration. Select
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
> Recent
features, rounding off for billing, and so forth.
To clear call duration timers, select
timers. For this you need the lock code, see "Security",
"Phone and SIM"
Show to access the list of missed
.
> Clear recent calls in the recent calls
Options
.
, and select Connect.
> Log > Options > Settings
Yes or No.
Options
on page 97.
> Clear list.
> Log > Call
> Show call
> Clear