Table of Contents
Advertisement
BATTERIES
Optional Batteries
A range of battery options are available for your phone.
Type
Tech.
BLS-5
Li-lon
BLS-2
Li-lon
BLS-2H
Li-lon
BMS-2/BMS-2S
NiMH
BMS-2V
NiMH
BLS-4
Li-lon
INDOOR
and a spare battery. Connect your charger to the back of the Desktop Stand, and then plug the charger into
a wall outlet. Place your phone and/or spare battery in the stand to begin battery charging. The charging
order is the phone battery first, and then the spare battery. Check the charging status of the phone battery
on the phone display.
Compatible with all battery options, the Desktop Stand is used together with the Fast & Light Charger, ACP-
9 or standard charger, ACP-7.
The stand is equipped with a LED indicator for the spare battery. A continuous red light indicates recharging,
and green light indicates the spare battery is charged. Charge the battery until the light turns green.
* Operation times are network dependent. Variation may occur. With EFR operation times are about
5% shorter, with HR 5-10% longer.
Capacity
Talktime*
600mAH
1 h 20 mins - 3 h
900mAH
2 h 30 mins - 4 h 30 mins
1000mAH
2 h 40 mins - 5 h
900mAH
2 h 30 mins - 4 h 30 mins
900mAH
2 h 30 mins - 4 h 30 mins
1500mAH
4 h 30 mins - 7 h
Fast & Light Charger (ACP-9)
Extremely light, the functionally designed multi-voltage Fast & Light Charg-
er, ACP-9, charges your phone battery quickly. Plug the charger into a wall
socket and insert the connector to the bottom of your phone.
The charging time is approximately 2 hours for BLS-2. Check the charging
status on the phone display. You can also use your phone while charging.
The Fast & Light Charger can also be used with the Desktop Stand, DCH-9.
Desktop Stand (DCH-9)
The Desktop Stand, DCH-9, provides mounting places for both the phone
Copyright © 2004 Nokia. All rights reserved.
Reference Information
Standby*
30 - 100 h
55 - 260 h
60 - 280 h
55 - 260 h
55 - 260 h
95 - 430 h
59
Advertisement
Table of Contents
