Gprs Modem Settings; Security Settings; Restore Factory Settings - Nokia 6310 Owner's Manual

M e n u f u n c t i o n s
Yes. Use loopset is available only when
Loopset is selected.

GPRS modem settings

You can connect the phone via IR, Bluetooth
or cable connection to a compatible PC and
use the phone as a modem to enable GPRS
connectivity from the PC.
Press Menu, select Settings
settings. Select Active access point
activate the access point you want to use.
Select Edit active access point
access point settings.
• Scroll to Alias for access point
Rename. Key in the name you would like
for the activated access point and press
OK.
• Scroll to GPRS access point
Key in the Access Point Name (APN) and
press OK.
An Access Point Name is needed to
establish a connection to the GPRS
network. You can obtain the Access Point
Name from your network operator or
service provider.
You can also set the GPRS modem service
settings (Access Point Name) on your PC by
using the Nokia Modem Options software, see
"Modem setup" on page
the settings on your PC and your phone, note
that the settings made on the PC will be used.

Security settings

Note: When security features, which
restrict calls, are in use (call barring,
closed user group and fixed dialling),
calls may be possible to certain
emergency numbers in some
networks (e.g. 112 or other official
emergency number).
Press Menu, select Settings
settings. Select
34
and GPRS modem
and
to change the
and press
and press Edit.
50. If you have set
and Security
Copyright © 2004 Nokia. All rights reserved
• PIN code request to set the phone to ask
for your PIN code every time the phone is
switched on. Some SIM cards do not allow
the PIN code request to be turned off.
• Call barring service
restrict incoming calls to and outgoing
calls from your phone. A barring password
is required.
• Fixed dialling to restrict your outgoing
calls to selected phone numbers if this
function is supported by your SIM card.
The PIN2 code is required.
• Closed user group. Closed user group is a
network service that specifies the group to
people whom you can call and who can
call you. For more information contact
your network operator or service provider.
• Security level. Select
will ask for the security code whenever a
new SIM card is inserted into the phone.
Select Memory and the phone will ask for
the security code whenever you want to
select the phone's internal memory or to
copy from one memory to another. See
"Selecting the phone book settings" on
page 20 and "Copying phone books" on
page 21.
• Change of access codes
change security code, PIN code, PIN2 code
or barring password. Codes can only
include numbers from 0 to 9.
Note that you should avoid using access
codes similar to the emergency numbers,
such as 112, to prevent accidental dialling
of the emergency number.

Restore factory settings

To reset some of the menu settings to their
original values, press Menu, select
and Restore factory settings. Key in the
security code and press OK. For example, the
(network service) to
Phone and the phone
and you can
Settings