Setup Of Screensaver Time; Wobbling - Panasonic TH-42LF5U Operating Instructions Manual

SCREENSAVER (For preventing image retention)

Setup of SCREENSAVER Time

After selecting INTERVAL or STANDBY AFTER SCR SAVER, the relevant Time Setup will become available for selection
and the Operating Time may be set. (Time cannot be set when "MODE" is "ON" or "OFF".)
Press to select SHOW DURATION / SAVER DURATION (When
INTERVAL is selected).
Press to select SCREENSAVER DURATION (When STANDBY
AFTER SCR SAVER is selected).
Press to setup.
Notes:
• Pressing " " or " " button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing " " or " " button continuously changes the Time by 15 minutes.
• "SCREENSAVER DURATION" of the "STANDBY AFTER SCR SAVER" can
be set from 0:00 to 23:59. When this is set to "0:00", "STANDBY AFTER SCR
SAVER" will not be activated.

WOBBLING

Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour
of image.
1
Press to display the SET UP menu.
Press to select "WOBBLING".
2
Press to select "ON" or "OFF".
ON: Shifts the position of the display image on a fi xed time
3
Press to exit from adjust mode.
Notes:
• If "MULTI DISPLAY SETUP" is set to "ON", this function does not operate.
• When this function is operating, part of the screen may appear to be missing.
28
button: Forward
button: Back
.
interval
SCREENSAVER
START
INTERVAL
MODE
12 : 00
SHOW DURATION
SAVER DURATION 3 : 00
SCREENSAVER
START
STANDBY AFTER SCR SAVER
MODE
6 : 15
SCREENSAVER DURATION
SET UP 1/2
SIGNAL
SCREENSAVER
INPUT LABEL
ECO MODE SETTINGS
WOBBLING OFF
COMPONENT/RGB-IN SELECT
RGB
NO ACTIVITY POWER OFF
DISABLE
ENGLISH ( US )
OSD LANGUAGE