Connections; Ac Cord Connection And ¿ Xing, Cable ¿ Xing; Video Equipment Connection - Panasonic TH-42LF25U Operating Instructions Manual

Connections

AC cord connection and ¿ xing, cable ¿ xing
Cable ¿ xing
Fix the cable in place using the bead band attached to the display.
Remove the bead band
1
Bead band

Video equipment connection

SERIAL
Control the Display by
connecting to PC.
(see page 13)
AC cord ¿ xing
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
2 Bundle the cables
Remove
AV IN
HDMI1, HDMI2
HDMI Input Terminal
(see page 11)
AV IN
VIDEO
Composite Video Input Terminal
S-VIDEO
S-VIDEO Input Terminal
(see page 10)
Unplug the AC cord
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet ¿ rst.
Stopper
Bundle the cables
DVI-D IN
DVI-D Input Terminal
(see page 11)
PC IN
PC Input Terminal
(see page 12)
Attach the bead band
3
Pass through to
the back
COMPONENT/RGB IN
Component/RGB Video
Input Terminal
(see page 10)
9