Cleaning The Machine; Maintenance; Needle Plate, Removing - Pfaff hobbylock 4752 Instruction Manual

Cleaning the feed dog
Switch the main switch to OFF.
Open the looper cover and the swivel plate.
Remove the needles and the presser foot.
Loosen the fastening screw of the needle
plate and remove the needle plate.
38
fastening screw
of the needle
plate
Machine maintenance

Cleaning the machine

Switch the main switch to OFF.
Open the looper cover and swivel plate. Use
the cleaning brush provided to remove any
waste thread.
In order to clean the upper blade and the
feed dog, you may also use a vacuum
cleaner.
Remove any waste thread from the feed dog
towards the front using the cleaning brush.
Fasten the needle plate, attach the presser
foot, insert the needles and close the looper
cover and the swivel plate.