Advertisement
Cording foot
This
special sewing foot
s used for
sewing a cording tape between two
fabric plies in one operation
Preparing the machine
set at N
(Hobbylock 788)
two needles or left one
engage cording foot
engaged
3 to 5
inserting the fabric plies
1. Raise the sewing foot
2. Set needle at its highest position
3. Place bottom ply, cording tape and
top ply (face side to face sidel
together under the sewing foot flush,
and insert up to the upper knife.
4. The cording (piping) must be placed
in guide 1.
5. Lower the sewing foot.
6. Make a sewing test.
1
Differential
feed setting:
Needles:
Sewing foot:
Upper knife:
Thread tension:
Stitch width:
Stitch length:
Thread spool support
When big thread spools are used (5,000
to 10.000 meters) it is recommendable
to place them on thread spool supports.
To prepare the machine, place centering
pieces 36 upside down on thread spool
holders 1 7, as shown in the illustration
at left.
When synthetic threads are used, the
thread spool supports prevent down
slipping thread windings from becoming
entangled, thus guaranteeing perfect
unreeling of the thread.
47
Advertisement
