Threading The Needle - Pfaff select 1520 Instruction Manual

D
E
10
Operate your Pfaff select
Threading the needle thread
Switch off the main switch
Raise the presser foot lifter (19) and turn the
handwheel until the take-up lever (9) has
moved to the top. Place the thread on the
spool holder (8) and fi t the corresponding
spool cap.
Now, using both hands, pull the thread into
guide A and under thread guide hook D. Pass
the thread through the lefthand threading slot
A
(11) and downwards. Pull the thread around
stop E into the righthand threading slot and
upwards to the take-up lever (9).
The thread must be pulled into the take up
lever (9) from left to right and downwards
again in the righthand threading slot. Finally,
pass the thread from the side behind one of
the two thread guides (25).
To thread the needle, place the thread from
front to back through the needle eye.
To thread the needle using the needle
threader (Model 1540), please refer to the
next page.