How To Embroider Words - Pfaff creative 2124 Owner's Manual

How to embroider words

With your Pfaff creative 2124, the 300 s-card is
included. On the 300 s-card there are 17 designs
and 2 different fonts, Block and Monogram.
1. Attach the embroidery foot and thread the
machine.
2. Attach the embroidery unit and put the
presser foot in the up position. Turn on
your machine.
3. The machine prompts you to press the
hoop selection button so that the machine
can calibrate.
4. Choose the block font, no. 1 on your
window, by pressing the font select button,
you see a number 1 below the design
number (A).
5. Each letter is represented by a number on
the window (see your embroidery book-
let). To embroider the word "Pfaff" input
no. 16 representing the "P", so that the
font number 16 is shown in the window
(B). Choose the hoop you want to use by
pressing the hoop select button. Attach the
hoop with the hooped fabric.
When you have chosen the fi rst letter you
can rotate, mirror or scale your letter. Press
the rotating button once, and one arrow
will be shown inside the hoop. Move your
letter to your desired position in your hoop
by pressing the embroidery positioning
buttons.
6. Press the reverse button to start embroider-
ing. When you have embroidered the fi rst
letter choose the next letter "f" (no. 32).
The next letter will automatically follow the
fi rst letter. Continue to sew the remaining
letters in the same manner.
If you have rotated, mirrored and/or scaled the
letter, your setting will be saved for the following
letters until you have exited.
3:16
A
B
Note: When positioning the characters close to an
edge of the embroidery hoop, make sure to have
enough space, considering both height and width,
for the characters you wish to embroider.
If a character is too high and/or wide to fi t next to
the previously embroidered one, the hoop is moved
back to the center of the embroidery area. You can
choose to move the character to the best position
possible or to rehoop the fabric to avoid misplace-
ment.