Table of Contents
Advertisement
Appliqué embroidery
All appliqué embroideries are marked with an A in Pfaff creative
cards/cds design booklets.
To embroider an appliqué design, place a stabilizer underneath
the fabric and hoop all the layers. Start to embroider. A straight
stitch outline is stitched around the appliqué design. When the
machine stops and you see an A in the display, place the appliqué
A
fabric on top.
Start your machine again, and the machine will sew a straight
stitch outline around the appliqué section of the design. When
the machine stops the second time, slide off the hoop but do not
take the fabric out of the hoop. Carefully trim around only the
appliqué fabric outside the straight stitch line.
Slide the hoop back onto the embroidery unit and continue
embroidering to fi nish the appliqué edges and the entire
embroidery.
Cutwork embroidery
All cutwork embroideries are marked with an A in Pfaff creative
cards/cds design booklets.
To embroider cutwork designs, place a stabilizer underneath the
fabric and hoop all layers. Start embroidering. A straight stitch
outline is stitched around the cutwork design. When the machine
stops and an A is shown in the display, remove the hoop but do
not take the fabric out of the hoop. Carefully cut away the fabric
from inside the straight stitch outline making sure you do not
cut away the stabilizer. To fi nish, slide the hoop back onto the
embroidery unit and continue embroidering.
3:20
Hide quick links:
Advertisement
Table of Contents
