How To Exchange Light Bulb - Pfaff hobbyblock 756 Instruction Manual

• HOW TO EXCHANGE LIGHT BULB
Danger:
Always unplug before relamping.
*
Light bulb is available at your
shop. Take
old bulb to the
shop and ask for same bulb.
*
If voltage indicated on the electrical rating plate of
your machine is 110
—
l27V, ask for light bulb
conforming to following specification.
*
Remove light cover screw and while pushing the
cover lightly to the rear, swing cover to the left
and remove from machine as shown in the illust
ration. Turn bulb to the left to remove. To replace
the bulb, push bulb into the socket and turn to the
right.
TROU
Fabrb
feed
* If voltage indicated on the electrical rating plate of
your machine is 200 240V, ask for light bulb
conforming to following specification.
Edison type (screw type) 200
—
240V 15W
Glass shape T-22
Lamp cap E14
Overall length
56mm
*
Remove light cover screw and while pushing the
cover lightly to the rear, swing cover to the left
and remove from machine as shown in the illust
ration. Turn bulb to the left to remove. To
replace, screw bulb into socket turning it to the
right.
MacI
oper
Bayonet type ll0- 127V 15W
• Glass shape
• Lamp cap
• Overall length
T-20
BA 15D/19
48mm
1
Light cover
screw
Need]
Thre
Stitci
Irregi
Fabri
Irreg
Fabr
Replace
Remove
42