Advertisement
t.rbefT7Y
With your stylus or your finger you can work with your
stitches directly on the work space by dragging and
dropping a selected stitchpoint. To position a stitchpoint just
touch it on the screen and drag it to the desired position.
When you do this you will change the stitch width and the
stitch length of the selected stitch.
r;
i
p
When you have moved the stitch point to the desired
position, touch
to confirm the stitch. The last stitch of
the sequence is marked with blue and the last stitch point is
marked with a red frame.
The dotted line, the cursor line, at the end of the last stitch
shows where the following stitch will be added (if the x
coordinate of the last stitch is not the same as the first
stitch). This ensures that the fabric is fed evenly when you
sew out your stitch pattern.
If you place the last stitch exactly at the same position (x
coordinate) as the first one of your stitch pattern the dotted
cursor line will not be sewn.
Placing single stitches
1)
4J
+
i4
For every further stitch you want to place, touch
To move single stitches
c
Another way to move the stitchpoint of a selected stitch and
for fine adjustment is to use the
and
icons
3
Advertisement
