Large-Area Embroidery; Cross-Stich - Pfaff tiptronic 6270 Instruction Book

Large-area embroid ery
By
combining individual programs you can aso
embroider large-area borders. Geometric shapes
iC
very suitable for this.
Transfer the embroidery pattern to the fabric using
stencil. The embroidery illustrated above was
)ased on an equal-sided
pentagon.
• Apply iron-on or tear-away stabilizei to the wrong
side of the fabric.
• Transfer the embroidery pattern.
• Eniijroioor the pentagon wit. Pr'ieran 48 tnd
the dots with Program 64.
liP; Embroider the
pentagon
using the keys foi
single pattern and 'needle down". In this way you
easily make up the pentagon by simply turning the
3 a ttern.
No matter whether you embroider tapes as critts,
blouses or home decor, graphic border desiqns are
simple to make with the cross-stitch program of
the tiptronic, and they look as if they are sewn by
hand. Even if you have never done cross-stitch
work before, these borders can be made with on
problem at all. Since the program can be set at
different sizes, you can achieve different effects
with little effort.
• Place stabilizer under
the
linen border.
• Mark the pattern as shown in tire illustration with
tailoring chalk or disappear mg-ink pen, nncl
embroider it
iii
the
desired color using Pioqiani
69. Press the "single pattern' key at the end of
each pahlern,
• Pull the threads to the back and knot them
tog eti or.
TIP:
The
border embroidery on the wide border can
be clone with a wide cioss stitci
i
81 to 5 nind and
on the
i
arrow border with o narrower
ci
oss-stitch
(3 miii).
•1
a'
a.
• j
,i-
,,
Cross-st itch
C)
0
I
.0
E
C)
cQ
'- 4
i0
-Ju
87