Operating your GrandQuilter™
Inserting a bobbin into
the hook
Switch off the main switch
and unplug the machine.
1. Lift the hook cover plate (A)
up and remove it. Open the
bobbin case cover (B).
2. Holding the latch on the
bobbin case (see picture),
position the bobbin case
into the hook aligning the
slot with the rib. The bobbin
case should lock into place
when the latch is released.
3. Close the bobbin case cover
and the hook cover plate.
To remove bobbin case
and bobbin
Switch off the main switch
and unplug the machine.
1. Raise the needle and presser
foot. Lift the hook cover
plate (A) up and remove it.
Open the bobbin case cover
(B).
2. Take the bobbin case out
of the hook by pulling the
latch and taking the bobbin
case straight out of the
hook.
3. To remove the bobbin,
release the latch, and the
bobbin will be released
from the bobbin case.
20
B
A