Zoom Frame Af/Zoom Af - Olympus E-PM2 Instruction Manual

Zoom frame AF/zoom AF

You can zoom in on a portion of the frame when adjusting focus. Choosing a high
zoom ratio allows you to use autofocus to focus on a smaller area than is normally
covered by the AF target. You can also position the focus target more precisely.
U must be set to one of the buttons using [Button Function] (P. 78).
I S O
200
250 250 F5.6 0.0 0.0
Shooting display
1
Press the U button to display the zoom frame.
• If the camera was focused using autofocus just before the button was pressed, the
zoom frame will be displayed at the current focus position.
• Use FGHI to position the zoom frame.
• Press the INFO button and use FG to choose the zoom ratio.
2
Press the U button again to zoom in on the zoom frame.
• Use FGHI to position the zoom frame.
• Rotate the control dial to choose the zoom ratio.
3
Press the shutter button halfway to initiate autofocus.
$
Notes
• Autofocus is available and pictures can be taken both when the zoom frame is displayed
and when the view through the lens is zoomed in. You can also perform AF operation with
the view through the lens zoomed in. g [LV Close Up Mode] (P. 73)
• You can also display and move the zoom frame using touch screen operations.
#
Cautions
• Zoom is visible only in the monitor and has no effect on the resulting photographs.
Q /
U
I S O
200
L N
HD
01:02:03 01:02:03
250 F5.6 0.0 250
30 30
Zoom frame AF
Comparison of AF and zoom frames
U
(Press and hold)
U
L N
HD
01:02:03 01:02:03
0.0
30 30
U
5×
7×
10×
14×
Zoom AF
EN
3
85