Power On; On/Off Button - Olympus E-PM2 Instruction Manual

Power on

1
Press the ON/OFF button to turn on the camera.
• When the camera is turned on, the (blue) power lamp will light and the monitor will
turn on.
• To turn off the power, press the ON/OFF button again.
 Monitor
R R
ISO-A
200
250 F5.6 250
Camera sleep operation
If no operations are performed for a minute, the camera enters "sleep" (stand-by) mode to
turn off the monitor and to cancel all actions. The camera activates again when you touch
any button (the shutter button, q button, etc.). The camera will turn off automatically if
left in sleep mode for 5 minutes. Turn the camera on again before use.
 ON/OFF button
Battery level
7 (green): Camera ready to shoot.
Displayed for about 10 seconds
after the camera is turned on.
8 (green): Low battery
9 (blinks red): Charge the battery.
Available recording time
01:02:03 01:02:03
38 38
Number of storable still pictures
1
EN 15