Remote Control - Optoma Projector User Manual

Remote Control

Using the Remote Control
Type A
Power On
Power Off
Lamp Mode
Mode
4:3
16:9
LBX
Native
Gamma
Brightness
Contrast
3D Format
Vol+ / Vol -
User Controls
Refer to the "Power On" section on page 18.
Refer to the "Power On/Off the Projector"
section on page 19.
Increase/Decrease the luminance of the im-
age. (refer to page 48)
Select a display mode for optimised settings
for different applications. (refer to page 32)
Scale the image at a 4:3 (1440x1080) aspect
ratio.
Scale the image at a 16:9 (1920x1080)
aspect ratio.
Enable the viewing of the letterboxed nonan-
amorphically enhanced movie at full screen
width. Part of the original image will be lost if
the image aspect ratio is less than 2.35:1.
The input source will be displayed without
scaling.
Set up gamma curve type.
Adjust the brightness of the image.
Control the degree of difference between the
lightest and darkest parts of the picture.
Manually select a 3D mode that matches
your 3D content.
Adjust to increase / decrease the volume.
25
English