Number Plate Light; Side Turn Signal Lights - Opel Automobile Owner's Manual

6. Push bulb into socket slightly,
rotate anti-clockwise, remove and
renew bulb.
Reverse light (right side), rear fog
light (left side) (1)
Tail light (2)
Turn signal light (3)
Tail light/brake light (4)
Tail light (5)
7. Engage bulb holder in bulb
housing, ensuring that it properly
engages.
8. Ensure that the bulb holder seal is
positioned as illustrated. Fit the
round seal on the fastening bolt.
9. Insert bulb housing in vehicle
body, and tighten securing nuts by
hand. Engage plug connector.
Close and lock cover.
After bulb replacement, check the tail
lights for proper functionality: switch
on the ignition, operate the brake,
switch on the side lights.

Side turn signal lights

Have bulbs replaced by a workshop.
Vehicle care

Number plate light

1. Insert screwdriver in bulb
housing, press to the side and
release spring.
151