Kyocera 2345 User Manual page 7

Although the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base station antenna,
the lower the power output.
Before a phone model is available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the limit established by
the government-adopted requirement for safe exposure. The tests are
performed in positions and locations (e.g., at the ear and worn on the
body) as required by the FCC for each model. The highest SAR values
for this model phone are:
AMPS modeHead: 1.24 mW/g; Body-worn:
0.250 mW/g with KWC body-worn accessory.
PCS modeHead: 1.24 mW/g; Body-worn:
0.195 mW/g with KWC body-worn accessory.
(Body-worn measurements differ among phone models, depending upon
available accessories and FCC requirements). While there may be
User Guide for the Kyocera 2345 phone vii