Philips 32HFL5573D/10 Installation Manual page 24

[Freeze on no signal]
When this feature is enabled, the TV will display the last
received frame in case of signal loss on DVB signals.
Show OSD with scrambled TV channel.
Power settings
The power on function allows the TV to enter a specific
mode ([On], [Standby], or [Last status]) of operation when
the mains power is activated (cold start):
[On]: The TV will always turn on (show startup channel) after
the mains power is connected.
[Standby]: When set, the TV will always turn to standby
(status as defined in Low power standby option) after the
mains power is connected.
The Low power standby option defines the TV to enter a
specific standby mode after pressing the On/Off button on
the remote control.
[Fast]: The TV will quickly turn on
(This mode will consume more
power in stand-by compared to Green mode).
[Green]: The TV will turn on less fast.
(This mode will consume
less power in stand-by compared to Fast mode).
The power consumption for the Smart power mode is
defined by the Smart Picture setting in the TV Setup part.
[Off]: The TV will start with the Standard Smart Picture
setting, but the setting can be changed in the guest setup
mode.
[On]: The TV will start with the default Smart Picture setting
and Smart Picture setup and is not selectable in the guest
setup.
23