Table of Contents
Advertisement
Note: If all options are disabled you have to go down to the Digital channels option and set the digital channels to ON.
A screen is displayed to make changes to set the channel list/map configuration:
[Symbol rate mode]:
[Symbol rate 1]: 0.000 (to set)
[Symbol rate 2]: 0.000 (to set)
The "Frequency scan" contains two options:
-
"Quick": this is a fast method to search channels but it might skip some channels (depending on the
network).
-
"Full": the scan will search on all frequencies and will store all channels available. This is the safe method if
you don't know the network parameters, but it takes more time.
Automatic TV will use the preset Symbol rate (6.900/6.875)
Manual Option to set Symbol rate 1 and Symbol rate 2
9
Hide quick links:
Advertisement
Table of Contents
