Before Using Your Dishwasher - KitchenAid KUDP01TJ Use & Care Manual

Undercounter
Hide thumbs Also See for KUDP01TJ:
Table of Contents

Advertisement

I-,eror¢ L
l)ishwasher
Tip Over Hazard
Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector
in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
GROUNDING
INSTRUCTIONS
For a grounded, cord-connected
dishwasher:
The dishwasher must be grounded. In the event
of a malfunction or breakdown, grounding will
reduce the risk of electric shock by providing a
path of least resistance for electric current. The
dishwasher is equipped with a cord having an
equipment-grounding
conductor and a grounding
plug. The plug must be plugged into an appro-
priate outlet that is installed and grounded in
accordance with all local codes and ordinances.
WARNING:
Improper connection of the
equipment-grounding
conductor can result in a
risk of electric shock. Check with a qualified
electrician or service representative
if you are in
doubt whether the dishwasher is properly
grounded. Do not modify the plug provided with
the dishwasher; if it will not fit the outlet, have a
proper outlet installed by a qualified electrician.
For a permanently connected dishwasher:
The dishwasher must be connected to a
grounded metal, permanent wiring system, or an
equipment-grounding
conductor
must be run
with the circuit conductors and connected to the
equipment-grounding
terminal or lead on the
dishwasher.
SAVE THESE INSTRUCTIONS
Install where dishwasher
is protected from the elements.
Protect against freezing to avoid possible rupture of fill valve.
Such ruptures are not covered by the warranty. See "Storing
Your Dishwasher" in the "Dishwasher Cars" section for winter
storage information.
Install and level dishwasher on a floor that will hold the
weight, and in an area suitable for its size and use.
Remove all shipping plugs from hoses and connectors
(such
as the cap on the drain outlet) before installing. See
Installation Instructions
for complete
information.
4

Advertisement

Table of Contents
loading

Table of Contents