KitchenAid KEBI101D Use And Care Manual page 8

fusing Your Oven
Using the control lock
The control lock prevents unwanted use of
the oven by disabling the control panel
command pads.
NOTES:
• Control lock is only available when
oven is not in Self-Cleaning cycle or
Sabbath mode.
• CANCEL/OFF will still work during control
lock, but you will need to press it for
1 second.
• On both single and double ovens, the
control lock will not disable the Timer. On
double ovens, the light, timer, and clock
are still available dudng control lock.
• Set control lock when cleaning the control
panel to prevent oven from accidentally
turning on.
To lock or deactivate the control panel:
Press and hold CONTROL LOCK for
5 seconds. A single tone will
sound and "CONTROL LOCK
/_" will appear on the display.
To unlock the control panel:
Press and hold CONTROL LOCK for 5
_ seconds. A single tone will
sound after 5 seconds and
"CONTROL LOCK F_- will
disappear from the display.
Prompt for start
If "START?" is lit, this means that START
has not been pressed. If you do not press
START, the programmed function will
automatically be canceled in 5 minutes.
Setting your oven for the Sabbath
The Sabbath mode is an oven operation
designed for the special needs of Orthodox
Jews on the Sabbath or holy days. It is only
available to provide a continuous untimed
bake function or, if desired, a timed bake
function. (See below)
NOTE: The Sabbath mode must be set
before it can be activated and remains set
until canceled.
To SET the Sabbath mode:
1. Open the oven door.
2. Press CANCEL/OFF.
e
Press the Number Pads in the following
order: 7, 8, 9, 6. You will hear tones
while pressing the Number Pads.
JG
4. Press START. "SAb ON" will appear in
the display.
NOTE: Turn the oven light on or off, as
_ esired, by pressing OVEN
LIGHT. The oven light will stay
turned on or off, whichever you
chose, while in the Sabbath mode. Opening
the door will not switch the oven light
throughout the Sabbath mode.
To START a BAKE function:
1. Press BAKE.
2, Press the Number Pads to set the
desired temperature from 170°F to
500°F (77°C to 260°C).
3. Press START.
de
Press and hold Number Pad 6 for
5 seconds. "SAb" will replace the
temperature in the display.
8