Kenmore 790.99613 Use & Care Manual page 18

Setting Oven Controls
Consumer Defined Control Features
Setting Temperature Display = Fahrenheit or Celsius
_ Broil
The BROIL ................ >"and FLEX CLEAN pads control the Fahrenheit or Celsius temperature display modes. The oven
control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit.
INSTRUCTIONS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1.
PRESS
To tell if the display is set for Fahrenheit or Celsius press
Br°iU (Figure 1) and hold for 7 seconds; "550 °``will appear
and "BROIL" will flash in the display and a beep will sound.
If "F" appears, the display is set to show temperatures in
for7seconds
DISPLAY
Figure 1
Fahrenheit (Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
2. Press _ to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C" (Figure
3).
..... Q
3. Press to accept the change or press to reject the
change.
@ Figure 2
Figure 3
18