Table of Contents
Advertisement
G
STEP
4 OF
7
FOOT BAR S
FIG4
1.
2.
Remove the protective rubber cap from the spindle (A) and slide the protective
plastic
sleeve (9) onto the spindle.
Fit the connecting
rod (B) over the spindle (A) and rotate the connecting
rod until it
locates on the square end of the spindle.
3.
Install the retaining bolt (10) in the end of the spindle and tighten with tool (17) and the
multi tool (19)
Note: The blue substance
on the bolt is thread lock. If the bolts are removed for any
reason they should be cleaned and fresh thread lock applied.
4.
Install the plastic cover (11) in the end of the connecting
rod.
5.
Repeat steps 1 to 4 for the other foot bar, making sure this connecting
rod (C)
is diametrically
opposite the first one fitted.
OMEGA
Fitness
9
Hide quick links:
Advertisement
Table of Contents
