Using Air Conditioner
To begin
operating
the air conditioner,
follow
these
steps:
1. Set the temperature
selector
to the highest
number
(coldest
or coolest
setting).
2. Set the mode
control
to the highest
COOL setting.
3. Adjust
the louvers
for comfortable
air flow (see Air Directional
Louvers).
4. Once the room has cooled,
adjust
the temperature
selector
to the setting
you
find most comfortable.
Review
the "Operating
Instructions"
section
for other
settings.
Operating
Instructions
TEMPERATURE
Max 7
1
t
5
3
Low
Low
Fan
High
Fan
MODE
The controls featured in this manual are representative of many available
models. Your model may offer slighdy different features.
Temperature
Selector
This is used to set the desired room temperature
when the unit is being
operated in the "COOL MODE".
To set the desired room temperature,
rotate the selector switch to the desired
setting. After the set temperature
is achieved, the thermostat
will automatically
start and stop the compressor in order to maintain the desired set temperature.
Rotate the temperature
selector clockwise for higher cool setting. Higher cool
settings will provide lower room temperature.
Rotate the temperature
selector counter-clockwise for lower cool settings.
Lower cool settings will provide higher room temperature.
Cool Hode
The desired cool setting
is selected by rotating
the NODE knob to the appropriate
location.
"high cool" has maximum
cooling effect and airflow.
"low cool" has minimum
cooling effect and airflow.
Note:If
your unit is equipped with a vent handle, keep it closed for maximum
efficiency.
Fan Hode
Rotate the MODE knob to select your choice of fan speeds for air circulation only.
Note: When selecting a fan speed, the compressor wilt not run.
Please always wait 3 minutes when turning unit off then on again, and when changing from cool to fan and back to
cool. This prevents compressor from overheating & possible circuit breaker tripping.
Failure to follow these instructions may be harmful to your unit.
Air Directional
Louvers
Air directional louvers control air flow direction. Your air conditioner
has the louver
type described below.
AUGER WHEEL
Auger Type
Rotate the Auger Wheel until the desired Left/Right direction is obtained.
@2009 Electrolux Home Products, Inc,
All rights reserved,
r
Need help?
Do you have a question about the FRA052XT726 and is the answer not in the manual?