Tv Speakers; Primary Mts; Autoprogram - Emerson CLC401EM2F Owner's Manual

TV Speakers
Select the audo output from the unit's speakers, or not. If your
amplifier s HDMI link function compat hie and connected by
an HDMI cable to this unit, some sound operations such as
volume up can be changed by using ths unit's remote control.
Make sure [fun-Link Control] is set to [On]. n,=l, p.22
Use A/• to select the desired option, then press OK,
On The sound wil be output flsm the unt's speakers,
Off The sound wil not be output from the unit's
speakers,
You can contro audio output flgm your
Ext. Amp connected HDMI nk devices by usng this unt's
remote control,
Autoprogram
If you switch wires (e,g. between antenna and C/_l V) or f you
move the unit to a d fferent area after the nitial sett ng, or f
you restore the D]V channeB you deleted, t s recommended
to use Autoprogram to perform a new channel search .....
1
Use A/T to select [Autoprogram],then press OK. i
2 Use A/T to select an approprate option, then press OK.
Primary MTS
You can set the output mode as a default for the sound mode
(NISC only).
This sett ngs not nterlocked when you change the output
mode by pressing SAP [Sound Functions] n,=l, p.12
Use A/• to select the desired option, then press OK,
Stereo Outputs stereo aud o,
Mono Outputs mono aud o,
SAP Outputs second audio progl_m,
Before you begin:
Make sure the unt is connected to antenna or cable.
1
Use &/v to select the _tem you want to adjus_L, then press
OK.
• When connected toVHF/UHF antenna, select [Antenna].
• When connected to C/X[V, select [Cable].
• [Autoprogram] will begin,
S
• When the scanning and memorzing are completed,the
lowest memorized channel will be d splayed.
Noe
After setting [Autoprogram], using CH A/T on the remote
contro skips un_vaiabe progl ms automatically.
If you are, not leceiv ng a sgnal fl_m your cable serv ce, contact
the Cabe prov de_:
If you pless _ or MENU durng autopl_gram, the sr,tup of TV
chdnnels w be car, teed,
Even if [Autoprogram] s competed, the ch nne} st,ICing w be
oat fthe AC power cord s ur,plu%ed before the unit goes nto
star'dby mode by press n£ 6,
The PIN code will be mqu rod once you set a PIN code n the
[Child Loci<]. ,,,,_ p.20
If you want to change your PIN code, foow the nstruction of
[Change PIN]. ,,,_ p.21
2
Adjustthe following items.