Removing The Doors - Electrolux EI26SS30JS3 Use & Care Manual

Removing The Doors
7
Getting through narrow spaces
If your refrigerator will not fit through an entrance area, you can reduce its size by removing the doors.
Check first by measuring the entrance.
Required Tools
You wilt need the following tools:
Top Hinge Top Hinge TOOLS
Neeessory:
Cover Front Cover Rear
Screw'-._ _ Screw
sHLIrge_ Phillips" HeQd
AND
3/8" Rxed
Wrench
To prepare for removing the doors:
1 Make sure the electrical power cord is unplugged from the wall outlet.
2 Open both doors and remove the toe grille (as explained in the
Installation Instructions that came with your appliance),
3 Remove any food from the door shelves.
4 Close the doors.
To remove the refrigerator top hinge cover:
1 Remove the three screws from each cover over the top door hinges,
2 Lift hinge cover straight up and off.
To remove the refrigerator door:
1 Trace lightly around the door's top hinge 'with a pencil.This makes
reinstallation easier.
2 Remove the two screws from the top hinge, Lift the door off of the
bottom hinge and set it aside,
3 Remove the two bottom hinge screws and hinge if necessary:
Adjustable Hinge
(some models)
Non-Adjusting Hinge
(some models)
CAUTION
Be sure doors are
set aside in a secure
position where they
cannot fall and cause
personal injury.
To reinstall the refrigerator door, reverse the above steps.