Removing The Doors - Electrolux EI23CS35KB0 Use & Care Manual

Removing The Doors
Getting through narrow spaces
If your refrigerator wi[[ not fit through an entrance area, you can reduce its size by removing the doors.
Check first by measuring the entrance.
Required Tools
You will need the following tools:
Top Hinge Top Hinge TOOLS
Necessary:
Cover Front Cover Rear
Screw _
_ Screw
Top Screw _ Phillips'" Head _ _%gwe B_tt__
AND
3/8" Fixed
Wrench
To prepare for removing the doors:
1 Make sure the electrical power cord is unplugged from the wall outlet.
2 Open both doors and remove the toe grille (as explained in the
Installation Instructions that came with your appliance).
3 Remove any food from the door shelves.
4 Close the doors.
To remove the refrigerator top hinge cover:
1 Remove the three screws from each cover over the top door hinges.
2 Lift hinge cover straight up and off.
To remove the refrigerator door:
1 Trace lightly around the door's top hinge with a pencil. This makes
reinstallation easier.
2 Remove the two screws from the top hinge. Lift the door off of the
bottom hinge and set it aside.
3 Remove the two bottom hinge screws and hinge if necessary.
Adjustable Hinge
(some models)
Non-Adjusting Hinge
(some models)
Rear Front
Cover Screw Cover Screws
ToP Hinge
_p Hinge
To reinstall the refrigerator door, reverse the above steps.