Advertisement
Available languages
Available languages
!=/
Extension
Wand
Remove the crevice tool from its storage
position.
Remove the extension wand from its storage
position in the wand.
Remove hose from the floor nozzle and attach
the extension wand. Attach the extension
wand onto the open end of the hose.
Add the crevice tool to the end of the wand
by inserting and twisting slightly. The crevice
tool doubles as a wand extension.
The dusting brush/upholstery tool will fit onto
its tip, allowingfor maximum cleaning reach.
The dusting brush/upholstery tool may also
be attached directly to the shorter extension
wand.
Wand
Orevice
Tool
The dusting brush/upholstery tool has two
options. When the front brush is removed
the remaining
part can be used as an
upholstery
tool.
Upholstery__
Brush
F.I CAUTION
When using attachments, be careful
not to overextend the stretch hose
when reaching. Trying to reach
beyond the hose stretch capability
could cause the cleaner to tip over.
TO STORE ATTACHMENTS
Remove dusting brush/upholstery tool from
wand. Snap into its storage location.
Remove crevice tool from the wand by twisting.
Remove the extension wand from the hose.
Twist the wand and pull from the hose end.
Place the crevice tool down into the extension
wand. Snap wand into its storage location.
Be sure the unit is turned off. Reinsert the hose
fully into hose coupling from which it was
removed. Press firmly to assure connection.
WARNING
Personal injury Hazard
DO NOT place hands or feet
underneath the unit when inserting the
hose. The agitator revolves rapidly
when the vacuum is turned on.
-9-
Advertisement
