Advertisement
Deep (:_e__
Ibavy I!}uty
d
sos
Ha_d W_h
Sp_ Only
O_OS
_
SO_
Level
Te bpeu,_
e
Sp_l
Speed
This manual covers many models and not all cycles, options, or features listed are available on
every model. Console shown above for reference only. Your model may differ.
Cycle Settings
Wash/Rinse Water Temperature
To change the temperature, press the Temperature
button
to scroll to the desired setting. Select a wash water tem-
perature according to fiber content, colorfastness and soil
level. A cold water rinse saves energy and reduces wrinkling.
For best
results
Follow the fabric care label
instructions on items to be
washed.
To protect your fabrics, not all temperatures are available
with every cycle. The indicator will not light if the setting is
not available with that cycle.
The temperature selected for the cycle will be remembered
and recalled each time that cycle is selected in the future.
To return to factory settings, press the Start/Pause and
Select buttons at the same time and hold until the signal
sounds.
To change the temperature once the cycle has begun,
press the Pause button, make the new selection and press
Start again.
Auto
Temp wash water temperatures are automatically
regulated to maximize detergent effectiveness and improve
washing performance. The water heater setting and its
distance from the washer, water usage in other parts of the
home, and seasonally low ground water temperature in some
geographic areas can affect water temperature.
Auto
Temp Hot/Cold
Use this setting for heavily soiled, white/colorfast
cotton
and perm press loads.
Auto
Temp Warm/Warm
Use this setting for washable woolens or when a warm
water rinse is desired.
Auto
Temp Warm/Cold
Use this setting for normally soiled, white/colorfast cotton
and perm press loads.
Auto
Temp Cold/Cold
Some warm water will automatically blend with cold tap
supply to achieve a precise Auto Temp Cold. Use this set-
ting for lightly soiled non-colorfast items, knits, delicates,
and hand washables.
Cold/Cold
Wash and rinse temperatures are equivalent to temperature
of cold tap supply. Use this temperature selection for fabrics
and colors that are prone to dye transfer.
Spin Speed
Maximum,
Fast, Med and Slow spin speeds are available
for each cycle. The spin speed and/or duration of final spin
vary from model to model and cycle to cycle.
Increasing the spin speed will extract more water, decrease
drying time and conserve energy. Decreasing the spin speed
will reduce wrinkling.
Select Slow spin speed to gently spin items that should be
line dried.
Use No Spin to omit the final spin at the end of the cycle.
The load will be very wet. Remove items from the wash drum
to drip dry or select the Spin Only cycle to remove excess
water at a more convenient time.
Soil Level
Select Heavy soil to increase the wash time or Light soil to
decrease the wash time in some cycles.
Advertisement
