Removing & Replacing Oven Door - Crosley CRE3890LWG Use & Care Manual

330 control with ceramic cooktop
Table of Contents

Advertisement

Removing and replacing the lift=off
oven door
To avoid possible injury when removing or
replacing the oven door, follow the instructions below
carefully
and always hold the oven door with both
hands positioned away from the door hinge area
(See Fig. 3).
The door is heavy. For safe, temporary
storage,
lay
the door flat with the inside of the door facing down.
To remove oven door:
1. Open oven door completely (horizontal with floor - See
Fig. 1).
2. Pull t hedoor hingelocks on bothleft a nd right d oor
hinges down from the oven frame completely towards
the oven door (See Fig. 2). A tool such as a small flat-
blade screwdriver may be required.
3. Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - See Fig. 3).
4. Close the door to the broil stop position (the oven door
will stop into this position just before fully closing).
5. With the oven door in the broil stop position, lift the oven
door hinge arms over the roller pins located on each side
of the oven frame (See Fig. 4).
To replace oven door:
1. Firmly grasp both sides of oven door along the door
sides (Do not use the oven door handle - See Fig. 3).
2. Holding the oven door at the same angle as the removal
position, seat the hook of the hinge arm over the roller
pins located on each side of the oven door frame (See
Fig. 4). The hook of the hinge arms must be fully seated
onto the roller pins.
3. Fully open the oven door (horizontal with floor - See Fig.
1).
4. Push the door hinge locks up towards and into the oven
frame on both left and right oven door hinges (See Fig.
2) to the locked position.
5. Close the oven door.
Special door care instructions
= Most oven doors
contain glass that can break.
Read the following
recommendations:
1. Do not close the oven door until all the oven racks are
fully in place.
2. Do not hit the glass with pots, pans, or any other object.
3. Scratching, hitting, jarring or stressing the glass may
weaken its structure causing an increased risk of
breakage at a later time.
oven
roller
pin ...
hinge --
arm
Fig. 2
Fig. 3
Oven door
hinge
locations
Fig. 1
j'
//
/
/
..............
Fig. 4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cre3890lsjCre3890lwhCre3890lsk

Table of Contents