Kenmore 721.33078 Owner's Manual page 8

Wand
Remove the extension wand from its storage
position.
Remove the crevice tool from its storage
position in the wand. Attach the extension wand
onto the open end of the hose.
Add the crevice tool to the end of the wand by
inserting and twisting slightly. The crevice tool
doubles as another wand, because the dusting
brushtupholstery tool will fit onto its tip, allowing
for maximum cleaning reach. The brushttool
may also be attached directly to the extension
wand.
HOSe
//- Extension
Wand
i/f Crevice
Tool
The dusting brush has two options. When the
front brush is removed the remaining part can
be used as an upholstery tool.
Upholstery __
Tool "__:/f,_
Dusting
Brush
CAUTION
When using attachments, be carefu_
not to overextend the hose when
reaching. Trying to reach beyond the
hose stretch capability couRd cause
the cleaner to tip over.
TO STORE ATTACHMENTS
Remove dusting brush/upholstery tool from
wand. Snap into its storage location.
Remove crevice tool from the wand by twisting.
Remove the extension wand from the hose.
Twist the wand and pull from the hose end,
Place the crevice tool down into the extension
wand. Snap wand into its storage location.
Be sure the unit is turned off. Reinsert the hose
fully into hose coupling from which it was
removed. Press firmly to assure connection.
WARNING
Personal Injury Hazard
DO NOT ptace hands or feet
underneath the unit when inserting the
hose. The agitator revolves rapidly
when the vacuum is turned on,
-8-