Kenmore 233.52153002 Use & Care Manual page 3

NIGHT
LIGHT
)
Fan
The 4-position switch (on the left) controls the fan. The fan is
OFF when the switch is rotated fully counterclockwise. Rotate
the switch clockwise to turn the fan ON to HiGH speed, to
MEDIUM speed, and to LOW speed.
Light
The 3-position switch (on the right) controJs the light. The Iight
is OFF when the switch is rotated fully counterclockwise. Ro-
tate the switch clockwise to turn the light ON for normal light-
ing, and to use as a night light.
_ WARNING: To reduce the risk of electric shock,
disconnect from power supply before clean-
rag.
Aluminum mesh filter
Clean frequently using hot water and a mild detergent or in
your dishwasher. The aluminum mesh filter should be washed
approximately every month depending on the amount of us-
age. Wash more often if your cooking style generates greater
grease - like frying foods or wok cooking.
Nonoducted filter (Clean Cooking hoods onmy)
(available separately - see page 4)
Clean filter surfaces frequently with a damp ctoth and a mJId
detergent. DO NOT immerse fiIter in water or put in dish-
washer. The speciaJ "Clean Sense" feature indicates when the
filter is to be repIaced. The biue and yel!ow strips will bIend to
green when it is time to change the filter. The "CIean Sense"
feature works best when facing toward the cooking surface.
Painted hood surfaces
Wiping reguIarly with mild soap/detergent and warm water
should protect painted hood surfaces. Be cautious about us-
ing "New and improved" cleaning agents. Your hood is installed
over hot cooking equipment. Most chemicaIs found in clean-
ing agents react with heat to loosen paint.
StainJess eteem hood surfaces
StainJess steel hoods should be washed regularly with a clean
cloth, warm water and mild soap or dish detergent. Clean in
the direction of the polish Iines. Rinse well with clear water
and wipe dry immediately. You may wish to apply light oil used
for furniture polishing to emphasize it's bright finish.
Fan aseembBy
Fan bIade can be cJeaned with a damp cJoth and mild deter-
gent. Use care when cteaning fan blade - it must not become
bent or misa[igned. DO NOTALLOW WATER TO ENTER MO-
TOR. Make sure alI surfaces are completely dry before re-
installing filters and restoring power.
Motor is permanentJy Jubricated. Do not oJJor disassembJe
motor.
:S
:S
O_
q_
q)
2
3