Kenmore 233.51049590 Use & Care Manual page 7

1. Remove _ from nose ofhood.
SHiPPiNG
TAPE
2. Remove WiringCover from inside thehood. Setcover
andmounting screw aside.
ifhood
is to be installed Non-Ducted:
e Purchase a Non-Ducted Kit, containing one C_ean
Cooking Filter.
e _nstaH the Clean Cooking Filter behind the aluminum
mesh filter.
e Skip to Step 6.
See page 4 for Non-Ducted Kit information,
Non-Ducted Kit availabme by calming Sears
at 1-800=4=MY-HOME _
COVER
_f hood will be installed Ducted - using 7" Round Duct:
e Purchase a 7" Round Damper,
e Skip to Step&
See page 4 for 7" Round Damper information.
7" Round Damper is available by calling Sears
at 1-SOO=4=MY-HOME_
_b
re
3"
ff hood will be installed Ducted - using 31A"x !0" Duct:
e Purchase a Ducted Kit containing a 3W' x 10"
Damper/Duct Connector and a Vent Dover.
e Continue with Step3.
3. Remove appropriate Duct Knockout from top or back
of hood.
See page 4 for Ducted Kit information.
Ducted Kit is avaimabmeby calling Sears
at 1-800=4-MY-HOME _
TOP RECTANGULAR
DUCT KNOCKOUT
(Remove for 3¼" x 10"
vertical discharge)
REAR RECTANGULAR
DUCT KNOCKOUT
(Remove for 3¼ " x 10"
horizom'al discharge)
_b
{b
2
,¢
7