Advertisement
Available languages
Available languages
1. Hang hood from (4) Mountin_
(from parts bag).
Slide hood towards watI until mounting screws are engaged
in narrow end of (4) _homes.
Tighten mounting screws
securely.
CAUTION:
Do not push on filter
or fan blade!
Pushing
on the filter or fan bmade may cause them
to interfere
with other hood parts.
KEYHOLE
(4)
MOUNTING
SCREW
(4)
DUCT
3¼" x 10" DUCTWORK
2. Connect ductwork to hood.
5094, 5104, & 5114 Models use 3¼" x 10" Ductwork.
5154, 5164, & 5174 Models use 7" Round Ductwork.
Use Duct _
to make joints secure and air tight.
3. Insta!I a 75 W Maximum
Light Bulb. Purchase bulb IocaEly.
Gently squeeze L_qht Lens Le_
to remove and replace
lens.
CAUTION:
Bulbs may be hot! Refer to bulb pack-
aging for further
information.
4. Make sure fan blade turns freely. Turn on power at service
panel, and test for proper operation.
MGHT LENS
LEGS
75 W MAXIMUM
MGHT BULB
10
Advertisement
