Table of Contents
Advertisement
Controls
This refrigerator operates most efficiently in normal
household temperatures of 65 ° to 90°F (18 ° to 32°C).
Posi-Temp
TM
System
Posi-Temp
Try'
system automatically maintains selected
temperatures in both refrigerator and freezer sections.
Refrigerator thermistor controls fresh food fan operation
while a separate freezer thermistor controls compressor
and freezer fan operation. These thermistors allow foods
to cool or freeze quickly and provide even temperatures
throughout refrigerator and freezer sections.
Showroom
Switch
Showroom switch allows electronic controls and interior
lights to function independently of refrigeration system.
Showroom switch is located behind air grille to right of
control panel. Refrigerator is shipped with showroom
switch in unit offposition.
Power Switch
Use power switch to disconnect power without
unplugging refrigerator. Power switch is located behind air
grille on top right side. Refrigerator is shipped with power
switch in on position.
Showroom
switch _
Central air
grill
Power
Switch may be accessed by removing center grille louver.
Touchmatic
TM
Electronic
Controls
TouchmatiC
electronic controls are located behind the
refrigerator door above the refrigerator section. Press
Display On pad to activate control panel. All pads except
Alarm Offpad remain inactive until Display On pad is
pressed. Once activated, pads remain programmable for
at least 10 minutes.
Entry Tone
Entry tone indicates a pad was pressed and command
was read and accepted.
•
Deactivate entry tone by pressing and holding Display
on pad for 3 to 5 seconds. Three short beeps indicate
instructions were accepted.
• Activate entry tone by pressing and holding Display
On pad for 3 to 5 seconds.
Refrigerator and freezer controls are preset at 5. Wait 24
hours after connecting power for refrigerator and freezer
sections to reach desired temperatures. After 24 hours,
adjust controls as desired. 1 is warmest setting and 9 is
coldest. Refer to "Setting Controls" section to set controls
precisely.
• Adjust refrigerator or freezer temperature by pressing
Display On pad then Ref Temp pad or Freezer Temp
pad. Press Warmerpad or Colderpad to adjust
temperature setting 1 level at a time. Holding down
Warmerpad or Colderpad adjusts temperature more
than 1 level at a time.
Max Refrigerator Mode
Max refrigerator mode adjusts refrigerator temperature to
coldest setting. After 10 hours, refrigerator temperature
automatically returns to previous setting.
• Activate max refrigerator mode by pressing Display
On pad then Max Refpad. Indicator light will glow.
•
Deactivate max refrigerator mode before automatic
reset by pressing Display On pad then Max Refpad.
Max Freezer Mode
Max freezer mode adjusts freezer temperature to coldest
setting. After 24 hours, freezer temperature automatically
returns to previous setting.
• Activate max freezer mode by pressing Display On
pad then MaxFrzpad.
Indicator light will glow.
•
Deactivate max freezer mode before automatic reset
by pressing Display On pad then Max Frz pad.
Advertisement
Table of Contents
