Frigidaire CPDS3085KF1 Use & Care Manual page 15

MINIMUM AND MAXIMUM CONTROL PAD SETTINGS
All of the features listed below have minimum and maximum time or temperature settings that may be entered into the
control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven
Lockout pad is delayed 3 seconds).
An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above
the maximum settings for the feature.
:IFEATURE .................................................. "INI"U ¸¸ "TE ¸¸¸"P: 'TI"E i " A XI"U ¸¸ "TEM P: i
PREHEAT
170OF,177°C 550°F,1288°C
BAKE 170°F/77°C 550°F/288°C
BRI )IL 400°F/205°C 550°F/288°C
CONVECTION BAKE 170°F/77°C 550°F/288°C
CONVECTION ROAST 1700F/77°C 550OF/288°C
CONVECTION BROIL 400°F/205°C 550°F/288°C
PIZZA 170°F/77°C 5500F/288°C
NUGGETS 170°F/77°C 550°F/288°C
12HF. Mode 0:01 Min: 11:59 Hr./Min:
24 Hr. Mode 0:01 Min. 11:59 Hr./Min.
CLOCK T!ME 12HF. MOde 1:00 Hr./Min: 12:59Hr./Min,
24 Hr. Mode 0:00 Hr./Min. 23:59 Hr./Min.
DELAY START 12HF. Mode 1:00 Hr.lMin. 12:59 Hr./Min:
24 Hr. Mode 0:00 Hr./Min. 23:59 Hr./Min.
BAKE TIME 12 HF.Mode 0:01 Min: 5:59 Hr./Min:
24 Hr. Mode 0:01 Min. 5:59 Hr./Min.
SETTING THE CLOCK
The CLOCK pad isused to setthe clock. The clockmay
be setfor12 or 24 hour time of day operation. The clock
has been presetat thefactory forthe 12 hour operation.
When the range isfirst p lugged in,or when the power
supplyto the range has been interrupted, thetimerinthe
display will flash.
To set the clock (example below for 1:30)
1. Press CLOCK. "CLO" will appear in the display.
2. Press 1 3 0 pads to set the time of day to 1:30. "CLO"
will stay in the display.
3. Press START. "CLO" will disappear and the clock will
start.
CHANGING BETWEEN 1:2OR 24 HOURTIHE
OF DAY DISPLAY
1. Press and hold CLOCKfor 6 seconds. "CLO" will appear
in the display.
2. CONTINUEholdingthe pad until"Z2HrdAY"or"24Hr
dAY" appears in the display and the control beeps
once.
3. Press SELF CLEAN to switch between the 12 and 24
hour time of day display. The display will show either
"12Hr dAY" or"24Hr dAY".
.
5.
Press START b accept thechangeor press CANCEL to
reject thechange.
Reset thecorrect t imeas described i nTo setthe Clock
above.Please notethatif the24 hourtimeofday mode
was chosen, the clock will now display time from 0:00
through 23:59 hours.